Superon AG 34 Cd Silver Brazing Alloy | Superon Technik

India’s No.1 in stainless steel welding consumables — by far

Select an industry

Steel Industry

Rolling mills, ladles and continuous casting run hot and abrasive. Reclamation keeps rolls, moulds and grabs in service between campaigns.

Common consumables

Hard surface electrodes
Cast iron electrodes
Cladding & die build-up

Open industry page

Marine Sector

Propellers, shafts and seawater pumps face cavitation, corrosion and dissimilar joints made afloat.

Common consumables

Cast iron electrodes
Copper alloy electrodes
Nickel & Inconel grades

Open industry page

Earth Moving & Mining Sector

Buckets, teeth, crawlers and drill strings work in rock. Build-up and hardfacing return them to profile on site.

Common consumables

Repair & joining electrodes
Cladding & die build-up
Hard surface electrodes

Open industry page

Cement Plants

Crusher hammers, kiln parts and separator plates face limestone abrasion end to end. Most of it is rebuilt in place.

Common consumables

Hard surface electrodes
Cladding & die build-up
Cast iron electrodes

Open industry page

Sugar Plants

Mill rollers, cane knives and juice-side plant wear through every crushing season. Roller arcing is routine maintenance.

Common consumables

Cladding & die build-up
Cast iron electrodes
Hard surface electrodes

Open industry page

Transport Sector

Engines, gearboxes, axles and chassis rails come in worn or cracked. Fleet workshops rebuild rather than replace.

Common consumables

Cast iron electrodes
Cladding & die build-up
Hard surface electrodes

Open industry page

Railway Sector

Locomotive, wagon and permanent-way components repaired back to specification in the shed and at the depot.

Common consumables

Cast iron electrodes
Repair & joining electrodes
Cladding & die build-up

Open industry page

Oil & Petrochemical Sector

Refinery vessels, exchangers and rotating equipment in high-temperature and corrosive service.

Common consumables

Nickel & Inconel grades
Cladding & die build-up
Hard surface electrodes

Open industry page

Power Sector

Boilers, coal mills and ash handling live with erosion, heat and fly-ash. Overlays stretch the run between outages.

Common consumables

Hard surface electrodes
Cladding & die build-up
Cast iron electrodes

Open industry page

Introduction

SUPERON Ag 34Cd is a free-flowing, general-purpose silver brazing alloy composed of 34% silver, 22% copper, 24% zinc, and 20% cadmium. With an operating temperature of 640°C, it conforms to international standards AG 11 and L-Ag34Cd. Its broad melting range makes it ideal for brazing joints with wide or non-uniform clearances. For best results, rapid heating is recommended to prevent separation of the lower-melting constituents, ensuring strong, reliable, and durable joints.

Enquiry

Applications

A free-flowing, general-purpose brazing alloy with a broad melting range, making it ideal for applications with wide or non-uniform clearances. However, to prevent the separation of lower-melting constituents due to liquation, rapid heating is recommended.

General Information

Ag	Cu	Zn	Cd	Others
34	22	24	20	-

Additional Information

Physical And Mechanical Properties

Melting Range	610-680
Density	9.1
Tensile Strength	400

Standard Sizes and Diameters

Diameters:	0.50 mm to 4.00 mm in form of Wire and Rod
Size & Weight:	Any other size and weight as per customer requirement

International Standards

, AG 11 , L-Ag34Cd

Want to discuss in detail